THIS IS A NEW DESIGN AND IS EASY TO SET UP, JUST PLUG IN THE NVR, KIT INCLUDES AN 8 CHANNEL RECORDER WITH A 1TB HARD DRIVE ALLOWING UP TO 4 ADDITIONAL CAMERAS TO BE ADDED LATER/ SIMPLY BOLT UP THE CAMERAS, PLUG IN THE SUPPLIED POWER SUPPLIES AND SWITCH ON, NO ACCESS WIFI KEYS TO ENTER IT JUST RUNS.!! JUST CLEAN, HIGH DEFINITION WIFI IMAGES.
PRICE INCLUDES A FLIP UP 10.1" LCD SCREEN WITH TILT AND SWIVEL
EVERYTHING IS PRE-INSTALLED AND SETUP READY TO GO. Additional cameras are available and 5 metre and 10 M DC extensiopn cables are available on our site, so a power point by the camera can be eliminated and 12V DC extended from the nearest power point.
No IP addressing conflicts as the NVR has 2 seperate internal networks, 1 for the cameras and 1 for the Internet.
Ideal for retail or wholsale sales areas where power is easily accessible from within a false ceiling etc, and the possibility of hard wiring would be difficult to hide.
This Kit has dual networks in the NVR, one for the cameras and a seperate network for the Internet (Router connection) making setup very easy and should be confliction free.
Dual Antennas on the NVR reduce interference at close range and offer greater distance from the camera and also reduces unwanted interference with a balanced lock-on from each camera.
This system will run independently without the connection to your router, it is all preset at our factory and the cameras automatically connect to the recorder and switch automatically to alternative channels to avoid clashing with existing wifi. Router can then be connected with the supplied cable so smartphone login can be used, just scan the QR code from the instruction manual or from the screen.
Factory setup is done for you matching the Cameras to the NVR the moment you power up and Motion Detection recording is already setup for you.
The Smart phone setup is just as easy, connect with the Supplied LAN Cable from the WAN port at the back of the NVR to your Router, scan either the QR Code in the manual or on Screen with I-Phone or Android, this takes you to the APP store and automatically downloads the App to the phone, the only entry to make is the Serial Number (Cloud ID) which is on screen, connections are obtained automatically.
Ideal for houses, shops, etc. where cabling is a problem because of decoration or layout, savings on installation costs with this kit could be substantial.
1 x 8 Channel 1Tb NVR with Dual Hi-Power WIFI Antennas,includes 12V 3A PSU and USB mouse, 4 additional cameras can be added later
1 x 10.1" LCD Screen Flips up and Tilts and swivels. HDMI & VGA ports allow external screens or TV's to be connected.
4 x Wifi IP 720p High Definition Bullet Cameras with 30 metres of triple I/R ARRAY night Vision, 3.6mm lens fitted to each approx 70 deg view angle
4 x 12V 2A Camera Power Supplies, UK 3 pin plug power Supplies
1 x LAN/WAN Cable for Router connection
1 x Easy install step by step guide, with graphical screen shots, illustrated Smart Phone setup guide.
|Backup Mode||USB Backup|
|Max Capacity||4TB Max Drive Size|
|Network Interface||1 adaptable RJ45 10M/100M for router connection, 1 Wifi Interface for the 4 x Cameras, Dual WIFI Antennas.|
|Operating System||Embedded Linus OS|
|Output||HDMI/VGA HDMI & VGA RESOLUTION: 1024x768, 1366x768,1440x900,1920x1080 Integrated 10.1" LCD screen, flips up and tilts and swivels.|
|Playback||1 - 4 channel|
|Synch-playback||1 or 4CH|
|Video Out Resolution||720P|
|Video Recording Modes||Manual, Time, Motion, Alarm|
|Camera||720p Wifi IP Camera with triple IR Arrays|
|Day & Night||Auto/Color/BW|
|Lens||4 x pcs of 720p IPC with 3.6mm|
|Minimum Illumination||B/W: 0.01 Lux, I/R Range up to 30 Metres|
|Power Supply||DC12V3A UK PSU|
|Resolution||1280*720 16:9 High Definition|
|Size of Camera||100mm (L) x 70mm|
|Weight||Per Camera - 500g|
|Sensor Area||1/3" Progressive Scan Sensor|
Write a review
Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: