Pan Tilt & Zoom (infra Red) Remote Controller

Low cost at £29.99 each for the kit.

Programme Cruise to Presets providing your dome has built in presets, pause period is set and fixed  to 8 seconds.

Simple to set up, display on the unit is used for setup and for control when in use, requires Cat5e to be wired from the Remote Sensor to the Camera , and/or to the DVR if dual control is needed.

This unit is recomended for use with our PAN/TILT Camera PT-20-IR, in fact it performs brilliantly with all a PTZ's and Zoom Cameras

Also this is a great engineers tool, most DRV's and some PC's once a tour is setup presets points can be added but very rarely can they be deleted or edited, this unit can write to most domes that store presets internally and simply remove them, allowing a new tour to be set up, note that the Software on all our 32 Channel DVR's and our DVR cards can edit and delete PTZ presets.

Note That while Batteries are supplied for the REmote Control a 12V DC is required to power the Receiver,  a12V DC power supply is not supplied, Connection is via a standard 2.1mm plug.

Not compatable with our 27 X Zoom Camera Stock Code:CAM30-9/EZ/PLUS it functions with all our other Zoom and Pan/tilt & Pan Tilt Cameras,  we believe it is due to a Copyright issue.

Free delivery and 12 months warranty on this product, 

This is a simple but unique device that allows an Infra Red sensor to sit on your desk or shop counter and allows control of a Pan/Tilt/Zoom Dome using the Infra Red Remote Control unit. easier to control than a mouse as the operator does not have to keep clicking.

Simply wire from the Infra Red sensor back to the RS485 dome connections, operates on Pelco D, 2400, addressing and controlling up to 10 Cameras.

Works with any Pan/Tilt dome that is RS-485, Pelco-D 2400 bps.

Unit can be wired in Parallel with any DVR to allow control from either, although the idea is to avoid the use of the DVR for control without braking the bank.

As with all Infra Red control units please site the receiver a lttle away from the DVR to avoid interaction between the Receiver & the DVR

To Follow