IP56 Weatherproof Junction box 100mm

This product is available on our Buy 3 Get One Free deal,

Put 3 in your basket and we will add an extra one Free of Charge when we pack your order.

This is a 100mm IP56  weatherproof Junction box for your CCTV camera installation, a must when connections have to be protected from the weather, simply mount next to the Camera, drill 2 x 18mm holes in the lower edge and feed the Cable from the DVR through one hole and the Camera Cables through the other hole, snap together the connections or Passive Balun, if you are adding a Microphone this is the place to put it, then put on the lid , job done. 

Don't forget to run a bead of Silicone across the top and down each side where the box contacts the wall, this eliminates the chance of water running down the back of the box between the wall and the box and in thro' the screw holes.

Please avoid installing in the rain, any moisture that gets into the connections at this stage will corrode the connections before it dries out, the result could be that the camera will fail.

This is an IP56 neutral coloured Weatherproof Junction box, a must when connections have to be protected from the weather externally, simply mount next to the Camera , drill 2 x 18mm holes in the lower edge and feed the Cable from the DVR into one hole and the Camera cables into the other, snap together the connectors or Passive Balun, if you are adding a microphone this is also the ideal place to put it, then put on the lid, job done.

Size:     100 x100 x 50mm

Rating: IP56

Colour: Neutral