8 Channel wall mounted passive Balun, send Video from 8 Cameras down 2 lengths of Cat5e

Send Video from 8 Cameras down 2 Cat5e cables from up to 500Metres away from the DVR with this 8 Channel passive Balun for CCTV,

Totally passive, No power supply required

Wall mountable, this makes a very neat and tidy installation, 

8 x BNC sockets make connection of patch leads to a DVR or from cameras very easy, always looks neat and very professional.

Installers who do not support the weight of Cat5 cables close to the point of connection with a single Balun will eventually be guaranteed a Call back as Cat5e is delicate and will only withstand vibration when clamped (Tie wraps will do) .

This wall mounted BALUN with cat5e installed in trunking up to the Connection point will run for ever if  you crimp on 2  x RJ45 plug when all 8 channels are used for a professional permanent connection, using the terminal block connections (you can mix either connection for each bank of 4) is OK but ensure theer is no weight on the cables.

Wall mounting lugs are attached ready for installation.

Tip: as long as you can secure the cables use cat5e for the Patch leads to the DVR wityh our connectors CON18, this way you can patch with only 2 pieces of Cat5e very neat.

Balun 8 is an 8 Channel wall mountable CCTV Balun, with screw connectors and RJ45 connectors, no power is required and can transmit and receive video up to 500 Metres using Cat5e, 2 of these items can be used at each or Balun1 at the Camera end.

Anti-Surge  and anti-Thunder built in

Inputs: 2 x Banks of 8 pin terminal blocks, 1 for each of the 4 Channels

Inputs: 2 x RJ45 inputs, 1 for each of the 4 Channels

Fixings: Wall mounting lugs

Power: non required totally Passive

Distance: 500 Metres approx

Warranty : 12 months