4 Channel wall mounted passive Balun, Multiple video & RS485 control down 1 Cat5e

Send video from 4 Cameras to your DVR down 1 length of Cat5, terminated into this unit wit an RJ45 plug.

Totally Passive Design, No Power Supply Required,

Wall mounting lugs attached makes this a professional Installation,

4 Channel Wall mounted Balun, with RJ45 & Date Terminal for Speed Dome or Zoom camera Control, (occupies channel 1) Outputs are 4 x BNC sockets so that patch leads can be used to connect to the DVR inputs or Camera Outputs.

Makes it a very neat, tidy and professional looking installation

Installers who do not support Cat5e cable connections into single Baluns are Guaranteed a call Back, wall mounted Baluns allow trunking to be right up to the Balun so you can crimp an RJ45 plug to the Cable for a professional installation, RJ45 crimp configuration is standard 568-B Network wiring.

Use this Wall mountable Balun at the DVR side and feed from the Cameras with our Balun1 's.

Note you can also use port 1 for Audio.

Balun 4 is a 4 Channel Passive Balun that can transmit or receive Video in excess of 400 Metres in Colour, 1 Unit can be installed at the DVR end then our Balun 1's can be connected to the Cameras or another Balun 2 (4 Ch) can be used at the Camera end with Coax feeds from the Balun to each Camera.

Terminal block for Data, Speed Dome and Zoom Camera control (occupies Channel 1) when used for RS485 and up to 3 Video signals, use our adapter (Stock Code CON18) for a neat connection, and  RJ45 connector for Cat 5 input  is fitted.

Alternatively you can use this data line for Audio, the unit senses the difference between Video, RS485 and Audio and sets itself up accordingly,  for Audio you can connect to the DVR with standard Coax, 

Anti-Surge and Anti-Thunder is built in

The Technology: 4 x Video signals from up to 400 Metres away down Cat5e connected via an RJ45 plug into the Unit. 

or

Control + 3 x Video: Input 3 x Video inputs via the RJ45 socket,  connect the spare twisted pair from the PTZ or Zoom Camera into the "data" terminal and output thro' the BNC port 1 via Cat5e (order our Stock Code: BNC to Cat5e adapter...CON18 for a neat and secure installation)

or

Audio: use the data connector and Port 1 for Audio, it sets itself up automatically

Fixings: Wall mountable unit

Power Requirements: Nil

Connections: 1 x RG45 input socket,  4 x BNC Sockets, 1 Dual connector +/- data input terminal screwless push in connector.